Long time readers of my blog know of my obsession for Janet’s quilt, and the Candied Hexagon quilt pattern in general…  I started my Candied Hexagon quilt in early 2010.  I’ve posted updates occasionally, but never quite got around to posting a tutorial on my method of hand-piecing this quilt.  So, when Shruti asked for contributors to her ABC’s of quilting series, I jumped at the chance to tell her readers AND mine how I do hand-piecing.  Today I’m going to show you how I made this hexagon star block:

Basic tools you will need for hand-piecing:

• a lightweight, durable thread (I use Aurifil 50 wt in Ecru for all my hand-piecing)
• a few pins
• a good thimble (my favorite)
• and size 11 straw needles (my recommendation!) 
• templates

There are MANY options available for templates for paper piecing; including hand-drawn/traced or PDF paper templates, hand made freezer paper or plastic templates, add-a-quarter and add-an-eighth rulers for adding your seam allowance to a template, pre-cut paper shapes for English paper piecing, like those tiny hexagons pictured above by Paper Pieces, or plexi-glas templates such as the Marti Michell set I am using to cut out and hand-piece my Candied Hexagon quilt:

The great feature of these templates are the holes for marking your seam stop/start points on the reverse side of your fabric.  I use a 28mm rotary cutter (the “tiny” blade) to cut my fabric around the edge of the plexi template, having marked my pencil dots through the holes first.  Then I set the template aside, and trace my seam line from dot-to-dot. 

Cut and prepare each piece for your block and lay them out as they will be sewn together:

I start with the center hexagon and one of the pink triangles; DO NOT knot your thread, instead make a few stitches going towards the start point on your pink triangle, bringing the needle up exactly at the start point.

Then insert the needle back in to the start point, stitch back over the few stitches you just made and continue to sew your seam along the line.  This small backstitch will secure the end of each seam.

Continue stitching along the pencil seam line, bringing your needle up and out at the stop point. 

Just as you did at the start point, insert the needle back down at the stop point and backstitch 2-3 stitches to secure the end of your seam; trim thread.

Repeat this process to attach three of the pink triangles to the hexagon as shown:

Then attach a blue diamond to each side of the remaining three pink triangles; so you have four segments sewn like this:

To attach an outer Triangle/Diamond segment to the center Hexagon/Triangle segment, place them right sides together with trimmed corners and edges lined up:

Pin through ALL fabric layers AT the start/stop points on the pink triangle, with back and front  segments lined up where star points are to meet up. (See above).  On the reverse, your pins should be in nice and straight, and lined up with the start/stop points on the hexagon piece as well. 

Stitch from Start point at one end (including backstitch to secure the end of your seam) to the first stop point, at seam allowance.  Carefully insert your needle at stop point, through bothe seam allowances (really diagonally between the two seam allowances) coming out the other side at the start point marked on the hexagon piece:

Repeat to attach all three Triangle/Diamond segments to complete your hexagon star block; seams should be pressed flat towards outer edge on reverse side:

Have you ever tried hand-piecing?  Do you plan to give it a try?