At our house, my sweetie irons. I do. not. iron. clothes. (unless I absolutely have to–say, when he is out of town). But, pressing fabric and seams is a part of quilting and sewing, and I have no problem with pressing. It’s ironing that I loathe. Who’s with me here?!?
Anyway, I’ve never particularly liked pressing fabric on a traditional ironing board; that tapered/pointed end is counter-productive. So I made myself a Big Board:
First, I bought a piece of MDF, and cut it to 17″ x 48″.
Then, I covered it with Bo-Nash Ironslide 2000 (if you don’t have this on your pressing station, do yourself a favor and get it! You can thank me later). This comes 19″ wide, hence why my board is cut to 17″. The IronSlide 2000 was attached to the MDF with it’s self stick backing (you could reinforce it with double stick tape, if desired).
Finally, I wrapped it with a piece of 54″ wide “PURE” canvas, by Sweetwater for Moda. This is then stapled into the MDF from the backside. I posted in detail here how I do this “wrap and staple step” to get a nice clean edge and tight corners.
The BIG Board sits atop the traditional ironing board, and greatly increases your surface area for pressing.
Here’s the finished product, modeled by my sweetie pressing a fat quarter, ’cause sometimes he does that for me, too. 😉